| Rated insulation voltage Ui: |
75 V |
| Rated impulse voltage Uimp: |
1.5 kV |
| Switching current: |
1 … 150 mA |
| Connection Type: |
M12 plug connector, 8-pin |
| Installation Orientation: |
any |
| Degree of protection: |
IP65/IP67/IP69/IP69K |
| Item designation: |
CES-I-BR-U-C07-SA-157920 |
| Gross weight: |
0,055kg |
| ECLASS: |
27-27-24-03 Safety-related transponder switch |
| Mounting type: |
non-flush on metal |
| EMC protection requirements: |
Acc. to EN IEC 60947-5-3 |
| Risk time according to EN 60947-5-3: |
max. 125 ms |
| Risk time according to EN 60947-5-3, extension for each additional device: |
max. 10 ms |
| Safety Class: |
III |
| Current consumption: |
40 mA |
| Degree of contamination (external, according to EN 60947-1): |
3 |
| Output Type: |
Semiconductor outputs, p-switching, short circuit-proof |
| Rated Conditional Short-circuit Current: |
100 A |
| Discrepancy time: |
max. 10 ms |
| Off-state Current Ir: |
max. 0.25 mA |
| Test Pulse Duration: |
0.3 ms(Applies to a load with C<= 30 nF and R<= 20 kohm) |
| Test Pulse Interval: |
ca 100 ms |
| Tightening torque: |
max. 0.8 Nm |
| Ready Delay: |
5 s |
| Switching frequency: |
max. 1 Hz |
| Shock And Vibration Resistance: |
Acc. to EN IEC 60947-5-3 |
| Notices For UL Approval: |
Operation only with UL Class 2 power supply or equivalent measures |
| Additional feature: |
Caps included |
| Switching hysteresis: |
1 … 2 mm |
| Dimensions: |
40 x 26.5 x 18 |
| Operating altitude: |
max. 4 000 m |
