
Idem 175407: HLM-SS-CBA 4NC with Plastic Roller M20 | Safety Switch Accessories
“Stainless Steel Mini Belt Alignment Switch, 22mm diameter, 70mm roller.”
Request a quote
| Attribute | Value | 
|---|---|
| Approvals: | cULus | 
| Technology: | Mini Belt Alignment Switch | 
| Housing Material: | 316 Grade Stainless Steel | 
| UL Info: | Type 1 Enclosures.Use 16 – 12AWG copper conductors, rated 75ºC minimum.Intended for same polarity use.Electrical Rating A300 240V.ac 3A. (6,000 cycles)240V. 10A. carry only.Wire range 16AWG – 12AWG Copper Torque 7lb/in (0.8Nm)Earth bonding terminal inside enclosure if required. | 
| Roller Material: | 316 Grade Stainless Steel or Polyester | 
| Thermal Current (Ith): | 10A | 
| Enclosure Protection: | IP67, IP69K (IP67 at the connector) | 
| Operating Temperature: | -25 … +80 °C | 
| Vibration: | IEC 68-2-6, 10-55Hz 0.35mm | 
| Fixing: | M5 Bolts (Torque 2.0Nm) | 
| Utilization Category: | AC15 A300 240V. 3A | 
| Min Current: | 5V, 5mA, DC | 
| Rated Impulse Withstand Volt: | 2500VAC | 
| Mechanical Life Expectancy: | 500,000 Cycles | 
| Typical operating parameters: | 0.4Nm Torque 15-30 degrees contact changeover | 
| Conductor Size: | 1.5 sq.mm | 
| Product Number | Variant Description | 
|---|---|
| 175459 | HLM-SS-CBA 4NC with SS Roller QC-M23 | 
| 175408 | HLM-SS-CBA 4NC with Plastic Roller 1/2″NPT | 
| 175457 | HLM-SS-CBA 4NC with SS Roller M20 | 
| 175409 | HLM-SS-CBA 4NC with Plastic Roller QC-M23 | 
| 175458 | HLM-SS-CBA 4NC with SS Roller 1/2″NPT | 
 
	 
								 
								


